Application Networking

cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

Cisco UCS X-Series Energy Efficiency Offer

 

Forum Posts

Hi All,I have a 2921 with an 16port Ether Switch module and need to install the SM-SRE 710 for WAAS.on the 2921 G0/1 is the WAN 10.1.1.1 and the internal port G1/0 is LAN 10.1.2.1How do I assign the IP addresses to SRE module so that I can use WCCP t...

g.peart by Level 1
  • 1004 Views
  • 2 replies
  • 0 Helpful votes

I have ce674-5.5.15.2  OS on a WAE-674 shipped  by Cisco via an RMA. When I attempt to load the waas-accelerator-5.1.1f.1-k9.bin image, I get this error:Note: software download staging area is incomplete; not backing it up.The incomplete staging area...

Hi i tried to install SM-SRE-700-k9 module to cisco 2911 router , but fail to load IOS , when i am loading the IOS getting following error Router#$ install url ftp://10.0.0.2/waas-accelerator-4.4.3c.9-k9.bin         Delete the installed Cisco Wide Ar...

Saran S by Level 1
  • 718 Views
  • 1 replies
  • 0 Helpful votes

I was doing a packet capture on waas, the pcap shows source & destination ip address as well as Bi-directional packet flow with no issue.However, when I did the "show stat conn" on waas, i didn't see the traffic in question.  Why?Is that because the ...

TCAM by Level 1
  • 1767 Views
  • 8 replies
  • 0 Helpful votes

Hi AllI have various WAE appliances in my environment (574, 674, 7341 and 7371). They are also EoL/EoS but I won't be able to replace them as yet. Currently they are running on 4.4.5 and not much is being optimised. Mainly LDAP, WASF and HTTP are bei...