07-26-2012 03:38 AM
Hi,
I need to discovery members of a FT group set in a CSM LB.
I am on the Swicth_1 that is the standby and now I want to figure out which switch is the primary.
Is there any useful command?
Thanks.
Solved! Go to Solution.
07-26-2012 06:57 PM
Hi,
Cat6k-2# show module csm 4 ft
FT group 2, vlan 30
This box is active
priority 10, heartbeat 1, failover 3, preemption is off
Jorge
07-26-2012 06:48 PM
Hi,
Please use command: show module contentSwitchingModule 4 ft detail
The modules in FT will have same FT GROUP ID and usually it is recommended to have a different VLAN assigned for FT heartbeat exchange as well. So you can check manually on the basis of FT group ID which two modules are using it.
Another command which can be useful is: #show module contentSwitchingModule all ft
Regards,
Kanwal
07-26-2012 06:57 PM
Hi,
Cat6k-2# show module csm 4 ft
FT group 2, vlan 30
This box is active
priority 10, heartbeat 1, failover 3, preemption is off
Jorge
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide