CSM + SSL in redundant config with VRF lite feature
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
04-05-2005 09:02 AM
Hi, I'm wondering about such config:
- VRFlite functionality (several VRFs on the SUP720)
- CSM using route/bridge mode
- SSL SM accelerator
VRF functionality means that VLANs from several vrfs will terminate on CSM, several VLANs should go from CSM to SSL and servers will be in the several server VLANs
My question is if the CSM will be able to work in such situation - what with such cases as address overlapping, choosing correct vlans for the VRFs? Has anyone implemented such configuration?
- Labels:
-
Application Networking
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
04-11-2005 07:49 AM
I think the above setup will work. You could refer to the CSM configuration guide for more insight on the features that CSM supports.
http://www.cisco.com/univercd/cc/td/doc/product/atm/8110/8110/8110csm.htm. You could also refer to the following URL which explains the various features which are supported by the SUP 720.
http://www.cisco.com/en/US/products/hw/switches/ps708/prod_bulletin09186a00801599bc.html
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
04-11-2005 11:56 PM
Hi,
I mean Content Switch Module, not Compact Subscriber Module.
Regards,
