Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi all, What should be a normal round trip time (ping beetwen the end hosts) for a 64 byte Ethernet frame crossing the VPLS cloud? VPLS cloud is built on two ASR9000 in the core and two ME3600x as the PE routers. The core is using 10G links, PE are u...
Hi,Is there a way to correctly display ASR9k in Cisco view? I can see a ASR9006 chassis with fans, no RSP, and Unsupportd Cards display; or ASR9001 with no PSU, and no cards.I have a following hardware config:ASR 9001NAME: "module 0/RSP0/CPU0", DESCR...
Hi Guys,I'm trying to configure QoS on 10G L3 MPLS interfaces in 6500 with Sup2T. I need a simple thing - EXP bits should be preserved on Egress from ingress MPLS frames. I've found that it should work like this by default, but in my case EXP bits ar...
Hi,Does anyone know what is the current maximum number of VPLS instances on ME3600X (Advanced Metro IP Access license)? I've found on one of the old presentations that this was only 26. And why is this limitation present?Best regards,Krzysztof
Hello, Does anyone know what is required power in Watts for this card in Catalyst 6500? Or can anyone drop here the "show power" ouput with this card included?Best regards,Krzysztof
I have SwitchAddlets.cv50.v1-42 and SNMP v2 running. The only big difference is that I'm using the LMS in vrf.Credentials work, because I can see part of the device - chassis, PSU, but neither RSP nor line cards.
Right.I suppose that the answer can be the "ip pim dense proxy-register..." on the external interface, but I'm not sure. Are there other options?regards,Chris
Thanks Russ, that is clarification I needed. I'm making certain that those routes are not reflected back, but here, in my deployment it'd be good to have such feature. I simply need that some routes redistributed from other EIGRP proces are better th...
