12-19-2012 09:36 AM
I am trying to setup (2) Exchance 2010 CAS/HUB Server on Content switch with the following ports configured. 587. 25. 135, port 6005 range 65535.
Is there anything special I need to do. Below is what I have setup
service EX10HTC1-1
ip address x.x.x.x
protocol tcp
keepalive type tcp
port 587
active
service EX10HTC1-1A
ip address x.x.x.x
protocol tcp
keepalive type tcp
port 25
active
service EX10HTC1-1B
ip address x.x.x.x
protocol tcp
keepalive type tcp
port 6005 range 65535
active
service EX10HTC1-1C
ip address x.x.x.x
protocol tcp
keepalive type tcp
port 135
active
service EX10HTC1-2
ip address x.x.x.x
protocol tcp
port 587
keepalive type tcp
active
service EX10HTC1-2A
ip address x.x.x.x
protocol tcp
keepalive type tcp
port 25
active
service EX10HTC1-2B
ip address x.x.x.x
protocol tcp
keepalive type tcp
port 6005 range 65535
active
service EX10HTC1-2C
ip address x.x.x.x
protocol tcp
keepalive type tcp
port 135
active
content EX10HTC-1
add service EX10HTC1-1
add service EX10HTC1-2
vip address x.x.x.x
port 587
protocol tcp
dnsbalance roundrobin
active
content EX10HTC-2
vip address x.x.x.x
add service EX10HTC1-1A
add service EX10HTC1-2A
protocol tcp
port 25
dnsbalance roundrobin
active
content EX10HTC-3
add service EX10HTC1-1B
add service EX10HTC1-2B
vip address x.x.x.x
dnsbalance roundrobin
active
content EX10HTC-4
protocol tcp
add service EX10HTC1-1C
add service EX10HTC1-2C
vip address x.x.x.x
port 135
dnsbalance roundrobin
active
group EX10HTC_servers
vip address x.x.x.x
add destination service EX10HTC1-1
add destination service EX10HTC1-1A
add destination service EX10HTC1-2
add destination service EX10HTC1-2A
add destination service EX10HTC1-1B
add destination service EX10HTC1-1C
add destination service EX10HTC1-2C
add destination service EX10HTC1-2B
active
12-28-2012 11:17 AM
Hi Mehdi,
looks that it should work. Have you tested already?
---------------------
Cesar R
ANS Team
12-28-2012 11:44 AM
Yes we have tried but no success.
When I do a group EX10HTC_servers I see
EX10HTC1-1B 0 Down 255 0 TCP-6005 0
EX10HTC1-2B 0 Down 255 0 TCP-6005 0
12-28-2012 12:12 PM
One requirement based on my Exchange Admin person is the requirement for Port range of 6005 through 65535 which I have created for the services. But that is not an option in the content rule...See below for my config
service EX10HTC1-1B
ip address x.x.x.x
protocol tcp
keepalive type tcp
port 6005 range 65535
active
service EX10HTC1-2B
ip address x.x.x.x
protocol tcp
keepalive type tcp
port 6005 range 65535
active
content EX10HTC-3
add service EX10HTC1-1B
add service EX10HTC1-2B
vip address x.x.x.x
dnsbalance roundrobin
active
12-31-2012 12:38 AM
Hi Mehdi,
You can specify only 1 port or no port. When you dont specify any port in content rule then by default the port is any.
So irrespective of the port number the request will be forwarded to the servers.
regards,
Ajay Kumar
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide