hi all,
we noticed considerable longer response times for https-sessions using advanced-balance ssl than accessing the server directly. we use a css 11501 (without ssl module) and in the worst case we see about 3-4 times longer response times with the css than without. the css is just running in testing environment, so there are not many session going through it. is this delay 'normal behaviour' of the css when using ssl-id stickiness? does a higher platform (e.g. 11503) bring more performance in this issue?
Here is the respective config snippet:
===============================
content xxxx
vip address 172.18.26.129
protocol tcp
port 443
url "/*"
advanced-balance ssl
application ssl
add service test1
add service test2
active
=======================
Thanks in advance for any help!
Daniel