09-24-2010 01:54 AM
How this is available
– Enable high availability and redundancy for Cisco WAAS appliances in data centers.
Thank you.
Solved! Go to Solution.
09-24-2010 10:15 AM
Hi,
You can serially cluster two WAE devices with the Cisco WAE Inline Network Adapter installed to provide higher availability in the data center if a device fails. If the current optimizing device fails, the inline group shuts down, or the device becomes the overloaded, the second WAE device in the cluster provides the optimization services. Deploying WAE devices in a serial inline cluster for scaling or load balancing is not supported.
More deatils here: Clustering Inline WAEs
Hope this helps.
Regards.
PS: Please mark this as Answered, if this answers your question.
09-24-2010 10:15 AM
Hi,
You can serially cluster two WAE devices with the Cisco WAE Inline Network Adapter installed to provide higher availability in the data center if a device fails. If the current optimizing device fails, the inline group shuts down, or the device becomes the overloaded, the second WAE device in the cluster provides the optimization services. Deploying WAE devices in a serial inline cluster for scaling or load balancing is not supported.
More deatils here: Clustering Inline WAEs
Hope this helps.
Regards.
PS: Please mark this as Answered, if this answers your question.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide