Hey,
I have a requirement to load balance OWA 2010 inbound connectivity to 2 CAS servers using a ACE 4710 with sticky sessions enabled.
The CAS servers are currently responding on 80 or 443 at this moment in time. Eventually I want to off load the SSL to the ACE 4710, its currently running on the CAS servers. I need to enable sticky sessions to keep the session to the same CAS server for each internet based connection. I also have a proxy enabled for inbound connectivity so I cannot use source IP.
Here is my configuration but it doesn’t seem to be working, i am currently testing with port 80 connections not SSL. Anyone any ideas? Cheers!
serverfarm host INHOUSE-EXCHANGE-OWA-vFARM
predictor response app-req-to-resp samples 4
probe 443
probe HTTP-PROBE
rserver INHOUSE-TEST-CAS01-SVR
inservice
rserver INHOUSE -TEST-CAS02-SVR
inservice
!
sticky http-cookie SessionID INHOUSE-EXCHANGE-OWA-vFARM-STICKY
cookie insert
serverfarm INHOUSE-EXCHANGE-OWA-vFARM
!
class-map match-all INHOUSE-EXCHANGE-OWA-CLASS-MAP-443
2 match virtual-address 192.158.100.100 tcp eq https
class-map match-all INHOUSE-EXCHANGE-OWA-CLASS-MAP-80
2 match virtual-address 192.158.100.100 tcp eq www
!
policy-map type loadbalance http first-match INHOUSE-EXCHANGE-OWA-POLICY
class class-default
sticky-serverfarm INHOUSE-EXCHANGE-OWA-vFARM-STICKY
!
policy-map multi-match VIP-POLICY
class INHOUSE-EXCHANGE-OWA-CLASS-MAP-443
loadbalance vip inservice
loadbalance policy INHOUSE-EXCHANGE-OWA-POLICY
loadbalance vip icmp-reply
class INHOUSE-EXCHANGE-OWA-CLASS-MAP-80
loadbalance vip inservice
loadbalance policy INHOUSE-EXCHANGE-OWA-POLICY
loadbalance vip icmp-reply
!
