Application Networking

HiIs these possbile to got the waas performance over voice traffic ? For example , I have one data center in  EU and another remote location in Bangladesh. I intend to use two waas express on ISR router. Traffic from dhaka will transmitted to EU over...

Have two ACE 4710 in HA setup. We would like to setup HTTPS loadbalance(actually just a primary and standby configuration in the serverfarm). Initially this would be for Exchange OWA connections but may expand to more HTTPS connections later.I know t...

Hi,I've configured two ACE appliances with redundance (fault-tolerance VLAN).Since the following messages appears on ACE's :Apr 15 2012 14:43:59 : %ACE-4-405001: Received ARP RESPONSE collision from 192.168.10.253 e8.9a.8f.b2.68.7a on interface vlan1...

Hi,we are using the TCL LDAP_Script as a probe scripted for LDAP server farm. The default script the Cisco provided is sending only an anonymous binding to the LDAP servers, we are trying to modify this script to sned a credential binding with userna...

Good day.I have a question about RBAC on Cisco ACE. Is it a possible create user role, whitch allowed monitor serverfarm state ("show serverfarm xxx" {detail} command), but restrict "show running/startup config" commands?Configuration like following ...

There are two physical servers behind the load balancer. These servers arein VLAN54SRV212 -  205.190.54.212SRV213 -  205.190.54.213Load Balancer VIP for the above servers - 204.190.54.67Load balancer keep alive port - TCP 9999Load Balancer VLAN54 IPa...

Hi all,First of all, sorry for the long story...I have a strange situation with my CSS boxes and our enviroment. Let me describe the infraestructure.Our CSS boxes was deployed to serve the application on 2008. The hole solution was based on Microsoft...

hi ,Is it possible to modify conf with snmp on ace module like others 6500 catalyst ?Is ace answer to snmpset cmds ?thankx

I am trying to setup the Cisco ACE 4710 to cache content which is application/json mime type. As far as I know this content type is not supported. I would like to know if there is currently a workaround for that or if it is going to be supported in f...

Hello Netpros,I know the CSS is perhaps a little bit out of date, but there's still a lot of boxes running out there in the field.Is there a way (L2 or L3) to manage load balancing between web clients with no proxy configured and an array of squid se...

Hi all.I'd like to create a rule that does a basic redirect for users who hit a content rule.  However, I need to send them to a URL that is pretty long - over 255 characters.  Yet the maximum length appears to be 64 characters in the docs, and 255 c...

I have WAAS set up with tacacs authentication for ssh to the CLI. Whenever I log into the CM web gui with my tacacs ID I can login, but I do not have any roles/privileges assigned to it. I have created a group within the web gui that matches the taca...

I Just deployed some of these new modules and running A4.x code. Has anyone in the world ever tried to configure an ACE with the maximum context?We run in tranparrent mode with 110 Contexts, we found that with a base config for each context(80 lines ...

Hello,Could someone confirm that a command "module clear-config" applied on 6513 catalystfrom the global configuration mode before you physically remove the module doeswhat it should?According to the command description, while this command exists in ...