05-17-2013 09:24 AM
Is this a workable configuration?
MSFC-10.1.1.1----------10.1.1.30-ACE------loadblancedVip-10.1.1.25
|
X-router
|
X-router
|
X-router
|
10.2.1.1 rserver
10.2.1.2 rserver
I think it will work with source nat, however I have not seen any documention about this.
Regards,
nick
05-19-2013 02:32 AM
Hello Nick,
This will work, as long as the source NAT address is routed back to the ACE's.
Just to quickly go through the stages
This is the basic idea on how it works.
Hope this helps
Please rate useful posts & remember to mark any solved questions as answered. Thank you.
05-20-2013 06:22 AM
Hi Nick,
One arm load balancing is very common and I have see a lot of environments configured this way. Below is a link to the documentation guide that details the one-arm scenerio.
-Alex
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide