Application Networking

Hi,which WCCP setup will result in better performance in a WAAS enviroment?- It's a remote branch- The WAN is based on a DMVPN design and the local bandwidth is 4 Mbit/s- A WAVE 694 will be installed- App. 100 userTwo solutions are discussed- Cisco 1...

Hi,two short questions:- Is WCCP V2  functional on the new 3850 switches- Which release and license is recommended?Many thanks in advance for quick response!Peter

Hi all,I have a WAAS network using WCCP for traffic redirection. My dilemma is I have a 6509 at the data center with MSFC doing inter-vlan routing and two routers, each connecting to a separate WAN cloud (Sprint and Verizon). I have a route-map set u...

Any have any recommendations for optmizing DDM and DRDA for DB2 replication. There's no encryption.Thanks in advance.

On wae (which used to work before), I am seeing this:wae#sh arpProtocol  Address          Flags      Hardware Addr     Type  InterfaceInternet  <default gw>   INV        <....................>    ARPA  GigabitEthernet1/0It cannot reach default gatewa...

Hi AllWe received two vulnerability alerts for different web sites behind Cisco ACE:　1) Vulnerability - SSL / TLS Renegotiation DoSDescription: The remote service encrypts traffic using TLS / SSL and permitsclients to renegotiate connections. The com...

Hi all,I'm desperately trying to get the ACE to limit access to a certain policy based on a list of source address hosts.So far I've gotten this configuration:object-group network ALLOWED-IP  description IPs allowed to access HTTPS  host 94.247.XXX.X...

Hello All,I have a physical server running behind the ACE module ACE20-MOD-K9. The Server has several virtual machines. One of that virtual machines, has a WEB SERVER running virtual https servers. For example, server with IP address 10.0.0.20/24, ha...

I am desiging a topology with two Cat 6509 and Two ACE Module, one ACE per Catalyst. I am thinking to  use bridge mode for the customer contexts, I would like to know if the Bridged mode is an Assymetric topology. The server gateway is the ip address...

Dear all,I feel quit stupid, but is that a valid design?? I'm not 100% sure because of VLAN 20...LB is working everyhting is fine, but from the Server itself, I have trouble to reach other systems..ping, trace, other services are not working..Design ...

Hi,I want to deploy a high availability solution for web servers in two data centers. In the primary data center I have deployed a group of web server and I want two deploy additional servers in a secondary data center for disaster recovery and high ...

Is this a workable configuration?MSFC-10.1.1.1----------10.1.1.30-ACE------loadblancedVip-10.1.1.25|X-router|X-router|X-router|10.2.1.1 rserver10.2.1.2 rserverI think it will work with source nat, however I have not seen any documention about this.Re...