Transfering a WAVE-574 Config

[eharbensc]

Hi All,

I'm trying to determine where the config file is located on my WAVE-574 device. I recently had the device RMA'd (fault DIMM slot and console port) and i'm hoping to retain my previous config. The issue is that since the console port was inaccessible and there was no remote access, I have no way of getting at the config file. I have the new device in hand, and what I was hoping is that I could swap out the hard drive or the flash card and transfer it to the new unit since they are identical units. My worry is that the IOS versions are different and simply swapping memory won't work.

Are there any ramifications to simply swapping the hard drive and the flash card in hopes of transfering the same IOS and config to the new device?

Any insight would be greatly appreciated.

Best Regards,

Evan

[Daniel Laden]

If you have used the WAAS Central Manager to push out the config, you can provide the new hardware an IP address and have it assume the role of the displaced WAE.  The CM will push the configs to the WAE.

Recovering WAAS Device Registration Information

http://www.cisco.com/en/US/docs/app_ntwk_services/waas/waas/v441/configuration/guide/maint.html#wp1105458

The DRE cache would need to rebuild.

Thank You,

Dan Laden

Cisco PDI Data Center

Want to know more about how PDI can assist you?

http://www.youtube.com/watch?v=4BebSCuxcQU&list=PL88EB353557455BD7

http://www.cisco.com/go/pdihelpdesk