Hi ,
I am new to ACE , We now have a new requirement . We are replacing existing pair of CSS with ACE 4710 appliances. The problem here is that I can see from the configuration that some SSL certificate installed in CSS .Is it possible to transfer the existing SSL certificate from the 11503 to the ACE? Or, do we need to generate a new key pair and CSR on the ACE? Is there any document available to know the steps for the same. Your help in this will be highly appreciated.
Regds
Ravi
Solved! Go to Solution.
Hi Shibi,
You should be able to export both the key and certificate from the CSS and import them into the ACE.
To export the certificate from the CSS, you just need to do the following:
Once exported, you can export these to the ACE using the instructions documented at
I hope this helps
Daniel
Hi Shibi,
You should be able to export both the key and certificate from the CSS and import them into the ACE.
To export the certificate from the CSS, you just need to do the following:
Once exported, you can export these to the ACE using the instructions documented at
I hope this helps
Daniel
Thanks Daniel, Will try this .