wccp web-cache works slow, slowstart

[thomas.kauert]

I have running CE510 working as transparent cache with c7206VXR on a separate subnet (LAN 2). Client request´s (LAN 1) need 2-3 minutes to get a web page or get a timeout. Redirect´s for wmt or mms work fine.

[thomas.chen]

Do you have the following command enabled on the CE.

http cache-miss revalidate

Also check if the following commands are present

no ip route-cache

no ip mroute-cache

If so disable this command and check how the performance of the CE is. I have seen that when the configuration has this command enabled the Cache engine wccp works very slow, but the performance improves by a large factor when this command is disabled.

[mcgbic]

Won't hurt if you check the Faste's duplex & speed settings. Sometimes our CE will just default back to half upon reboot. Also a bad disk may also cause slowness. Check status of all disks. "show disk detail". hope this helps