I do have this command configured in WAE. See below command copied from WAE (ip address removed for privacy):
wccp router-list 1
wccp tcp-promiscuous service-pair 61 62
router-list-num 1
exit
Please see further output from the router below. Another concerning indication is that the Service Identifier is showing '0' clients (meaning it recognize the WAE). Connectivity has been verified. WAE and router can ping each other.
cdrrtr01#show ip wccp
Global WCCP information:
Router information:
Router Identifier:
Protocol Version: 2.0
Service Identifier: 61
Number of Service Group Clients: 0
Number of Service Group Routers: 0
Total Packets s/w Redirected: 2617588181
Process: 50164
CEF: 2617538017
Service mode: Open
Service Access-list: -none-
Total Packets Dropped Closed: 0
Redirect Access-list: wccp-bypass-inside
Total Packets Denied Redirect: 5652247
Total Packets Unassigned: 77807
Group Access-list: -none-
Total Messages Denied to Group: 0
Total Authentication failures: 0
Total Bypassed Packets Received: 2
Service Identifier: 62
Number of Service Group Clients: 0
Number of Service Group Routers: 0
Total Packets s/w Redirected: 4222284950
Process: 6049274
CEF: 4216235676
Service mode: Open
Service Access-list: -none-
Total Packets Dropped Closed: 0
Redirect Access-list: wccp-bypass-outside
Total Packets Denied Redirect: 6031946
Total Packets Unassigned: 4069
Group Access-list: -none-
Total Messages Denied to Group: 0
Total Authentication failures: 0
Total Bypassed Packets Received: 3
cdrrtr01#show ip wccp 61 detail
No information is available for the service.
