01-08-2014 08:00 AM - edited 03-21-2019 10:12 AM
Good evening!
We have a customer with an Avaya IP Office that needs ATA devices in order to connect some analog end devices. We need to know if there is a CISCO ATA model with just one port.
We have taken a look and have seen the ATA SPA112 but it has two ports. We could propose this model but in order to connect to the IP Office, each port of the SPA112 needs to be configured with a different IP address. Is that possible?
Any help?
Best regards,
Sara Martinez
Solved! Go to Solution.
01-08-2014 11:54 AM
We need to know if there is a CISCO ATA model with just one port. ...each port of the SPA112 needs to be configured with a different IP address. Is that possible?
As far as I know, no (answer to both question). But you can use SPA112's first line only considering the second line is just not here.
Of course, unless you are interested in features unique to Cisco products you may consider other vendor's.
01-08-2014 11:54 AM
We need to know if there is a CISCO ATA model with just one port. ...each port of the SPA112 needs to be configured with a different IP address. Is that possible?
As far as I know, no (answer to both question). But you can use SPA112's first line only considering the second line is just not here.
Of course, unless you are interested in features unique to Cisco products you may consider other vendor's.
01-09-2014 12:26 AM
Thanks Dan!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide