I have had provision spa122 with new beta firmware spa122-1-2-0-028.bin.
In other topic i saw that spa122 is taking too long to provision. I figure out why is that so: every time (even if I put spa122 with latest firmware) spa122 upgrading firmware over and over again. Config files takes about 1-1,5 minutes and it is configured, but firmware upgrade takes about 7 minutes and here is the problem. I've tried everything...
So, my question is: HOW TO STOP SPA122 SO THAT SHE DOESN'T TAKES FIRMWARE MORE THAN ONCE?
Spa2102 upgrades firmware only 1. time provisioning, I need for spa122 to do upgrade only 1. time!
Hi, I am using the Handytone 502 (2 x FXS) , but also now have quite a few GXW4004/8 units which are great (4 and 8 x FXS), all easy to configure and none of the registration or quality issues we ahve in the current SPA range. Not so keen on the Grandstream IP phones but as far as the gateways are concerned they make a good alternative for the pap2t.
Good question. What's even more disturbing is that I had to sign yet another Beta Firmware agreement Friday for version 1.2.1.004. I tested that FW on Monday, and reported back the issues still present. They are supposed to be looking at three major issues I have tickets open for. Meanwhile, they released 1.2.1.??? on Friday - before they even sent me the link to pick up the Beta.
Dont upgrade to 1.2.1 I have have problems with every one that went into the field. I left 3 plugged in in my lab over the weekend and 1 was down and would not reconnect. It required a full reset to get it to connect. I also have had 2 stop requesting DHCP 1.1.0 was a much better production firmware, we had issues provisioning it but never had issues in the field. I have about 100 deployed so far we have never replaced on with 1.1.0 but have had to replace very one (about 10) that went out with 1.2.1