Hi there,
I have recently begun playing with APIC-EM,although it is easy to manage it,I have a problem.
APIC does not discover devices properly.I have simple topology where apic is connected to R1 and R1 ins connected to R2/R3. RIPv2 runs between routers so networks are reachable.What I noticed that, when I run discover,devices logs %SYS-5-CONFIG_I: Configured from 10.10.10.10 by snmp. Plus,wireshark capture proofs that APIC connects to devices.However I only see R1 as a result of this discovery test.
Most interestingly,even R1 is not added to Device Inventory list ( may be it must be enabled somehow,but I didnt see such option).
Could anyone help me to troubleshoot this issue? I use IP range discovery method (actually I tried CDP as well).
P.S APIC is deployed in vm in local network, and hope I ask in right place
Thanks in advance,
HTH,
Please rate and mark as an accepted solution if you have found any of the information provided useful.
