cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1022
Views
0
Helpful
2
Replies

SIP Normalization script to modify Remote-Party-ID to Diversion header

DENNIS WEIKEL
Level 1
Level 1

I"m having an issue where inbound calls rerouted back to PSTNT failling.  
Call flow:- ITSP—SIP—CUBE1—SIP—CUCM—CFWD All—SIP—CUBE1—ITSP.

 

The PSTN calling Party receives a long pause, with no ring back, then receives a fast busy.  

 

Our ITSP indicated the outbound SIP invite Messages for the second call leg contains a Remote-Party-ID which needs to be replaced with a Diversion Message where the original calling party is removed.  

 

The SIP Messages could be manipulated on the CUBE but would rather manipulate on CUCM.  

 

Does anyone have a SIP Normalization script that could be implemented on the CallManager SIP Trunk for performing the SIP message manipulation.  

 

Thanks in advance for your feedback.  

 

2 Replies 2

Hello, did you find any script to accomplish this?

wordenj
Level 1
Level 1