cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1084
Views
1
Helpful
2
Replies

what does this EpApi message mean

denes.istvan
Level 1
Level 1

Hello,

sometimes I get the following message from the EpApi:

LIP: 192.168.136.35:21106 (codec 7)

    RIP: 192.168.136.200:17682 (codec: 7)

    avg. missed packets (per sec.) dst: 0 src: 50

    avg. bytes trashed (per packet) dst: 160 src: 159

    last dst packet size: 2048 required: 160

    last src packet size: 400 required: 160

Can someone explain concretely what this means? Or point me toward a doc where this is explained. And what should I do so I don't get this message.

Thank you.

2 Replies 2

mkhodosh
Level 1
Level 1

This is Debug / Trace information from Cisco RtpLib. It looks like tracing is enabled in your App.

There is Cisco TSP Media Driver section in Cisco Unified TAPI Developer Guide. You can find Trace Options there.

The particular trace that you mentioned prints

     - local IP addr, port, codec  -  LIP: 192.168.136.35:21106 (codec 7)

     - remote IP addr, port, codec  -  RIP: 192.168.136.200:17682 (codec: 7)

     - and some data streaming statistics

Thanks for the info. Is it possible you could give me some info also about the data streaming statistics?

1. What is the source(src) and destination(dst) in this case?

2. avg. missed packets (per sec.) dst: 0 src: 50

- Does this mean that we didn't missed any packets but at the src average 50 packets are missed


3. avg. bytes trashed (per packet) dst: 160 src: 159

- We trashed some packet that were 160 bytes?