So unless I'm experiencing the "old code programmed the cards in the standby chassis" problem, I believe this update to be inaccurate at this time. You've listed 15.2(1)SY6 as a fixed version of IOS, I'm running that version and have opened a case w...
Good day.We are experiencing the same problem on Cisco MDS9148 (cisco MDS 9148S 16G 48 FC (1 Slot) Chassis) with latest NX-OS 8.4.1 installed: system image file is: bootflash:///m9100-s5ek9-mz.8.4.1.bin MDS9148-SAN-SW1# sh logg serLogging server: ena...
We have experienced the same symptom for the WLC version 8.5.135 on WLC 5520.. does anyone running the same version experienced this issue? the fix is again to reboot the AP.
I currently see high utilization on my WS-C3560E-12D-E running Version 12.2(40r)EX6Could some one please confirm if this version is affected or not with the reported BUG ?
Sorry to say I have installed ver 16.9.4 and still encountering this issue..I am trying to connect to a NAS via the 10G ports and it intermittently goes dead..Attempting t roll back firmware and hopefully find one that works.
I'm a little confused about this security advisory and BugID. The text of the advisory and Bug says that 12.6(1) and earlier is impacted, but then the Known Affected Releases section of the BugID says 12.5(0). Then the software download page still ...
Anybody got more information about this feature?I couldn't find any additional information about it, besides the little info in the bug.
It doesn't seem to be in any cisco documentation (that I could find).
The bug is reportedly fixed in 3.4.1 Update 1. However, this update does NOT fix the problem. I installed the update last night, and I am still unable to sort any columns in the alarm tables.
SolutionThis issue is fixed in 12,2(55)SE3 , 12.2(58)SE1 and later releases. Thefollowing interface configuration commands have to be applied to resolve theissue,Switch(config)# int x/ySwitch(config-if)# power inline port 2x-modeSwitch(config-if)# sh...
Cisco, Could you please please advice how DPI can be turned OFF on vEdge5000?As it stated in other CISCO docs, turn off DPI on vEdge5000 will affect QoS functionality, correct?"If you disable deep packet inspection (DPI) on a vEdge router, traffic di...
Hello,
for some customers I need some clarifications about this bug from Cisco. The problem is, that the description (especially the More Info section) does not match the product list attached to this bug.
More Info:The issue is only seen on N5K-C55...
