Has anyone got around bug CSCvd07607? Webadmin is disabled out of the box. I want to add wlan profile info from the deskcharger connected to the network.
Hello,
Does anyone know of a work around to this?
The ME was defaulted then configured via the web console. Then reset to take on the settings and now it comes up with "Config not syned to APs since no AP is present".
No SSID is being broadcast.
...
I see the workaround listed, and I understand that a table has to have some values set to null. Does anyone know where in Cisco Prime this is done? I cannot seem to find it and the command does not seem valid within the shell access of Prime.
I came across a very similar problem last night. SFP part number FTLF8519P3BNL-C4.
MDS 9250i version 6.2(13b)
When looking at the transceiver though it reports 'digital diagnostics feature not supported in SFP' so it doesn't report as a DOM problem...
Symptom: High auth latency seen on MnT node.
Conditions: After Upgrade to 2.1
Workaround: None
Anybody having this issue? I do get this alert regularly. Is it a false alert or is this really happening?
Add the following devices, whose hostnames with special characters cannot be changed, to the list:
-- Roku Premiere+
-- Pentair 520442 I-Link Home Adapter Interface
Cannot obtain IP address in RV series routers/firewalls.
In reference to the above listed bugg. The bug states that it is for version 12. However we have a client that is version 11.x and we are having the same issue. As well we have someone on version 8x. Same issue. Is there something in the paramete...
Heya
I've been looking for a solution for this. We have 3 standalone Aironet 3500's up and running nicely and the Associations tab shows all of the client devices as Unknown and with NONE as name.
I found 2 articles about the same issue, with no so...
1. The Touchpad gets hanged and we need to disconnect and reconnect it again post it starts working.
2. We lose the camera control also and needed to unplug and plug the tablet to regain control.
Hello,
We faced the same problem on Cisco 4500x Cisco IOS Software, IOS-XE Software, Catalyst 4500 L3 Switch Software (cat4500e-UNIVERSALK9-M), Version 03.06.03.E RELEASE SOFTWARE (fc3), ROM: 15.0(1r)SG11
Which image is fixing this issue for our sw...
Hi,
For this bug, does it only have fix on 2.1 (0.904) and 2.2 (0.901)?
I didn't found any same version on cisco download website, only available for version 2.1(0.474) and 2.2(0.470).
I believe other than the 2 version listed in "Known Fix Release...
