Hi,
I've also seen this behaviour in 10.2(4) and current recommended 10.2(6),
Duplicated in the lab, setup 4 SPF+ 10G interfaces in de same quad (e1/9-12) with qsfp>sfp+ convertor. Logging from connected test switch:
Remove of convertor+10G SFP in Eth1/11. Logging connected switch:
TEMP-CORE#
000577: *Dec 20 2023 15:02:50.668 CET: %LINEPROTO-5-UPDOWN: Line protocol on Interface TenGigabitEthernet1/1/3, changed state to down
000578: *Dec 20 2023 15:02:51.667 CET: %LINK-3-UPDOWN: Interface TenGigabitEthernet1/1/3, changed state to down
TEMP-CORE#
000579: *Dec 20 2023 15:02:51.669 CET: %OSPF-5-ADJCHG: Process 1, Nbr 10.1.100.42 on TenGigabitEthernet1/1/3 from FULL to DOWN, Neighbor Down: Interface down or detached
TEMP-CORE#
The rest of the interfaces in the quad flap. Logging on connected switch:
000580: *Dec 20 2023 15:03:05.976 CET: %LINEPROTO-5-UPDOWN: Line protocol on Interface TenGigabitEthernet1/1/1, changed state to down
000581: *Dec 20 2023 15:03:05.981 CET: %LINEPROTO-5-UPDOWN: Line protocol on Interface TenGigabitEthernet1/1/2, changed state to down
000582: *Dec 20 2023 15:03:06.095 CET: %LINEPROTO-5-UPDOWN: Line protocol on Interface TenGigabitEthernet1/1/4, changed state to down
000583: *Dec 20 2023 15:03:06.976 CET: %LINK-3-UPDOWN: Interface TenGigabitEthernet1/1/1, changed state to down
000584: *Dec 20 2023 15:03:06.979 CET: %OSPF-5-ADJCHG: Process 1, Nbr 10.1.100.42 on TenGigabitEthernet1/1/1 from FULL to DOWN, Neighbor Down: Interface down or detached
000585: *Dec 20 2023 15:03:06.986 CET: %LINK-3-UPDOWN: Interface TenGigabitEthernet1/1/2, changed state to down
000586: *Dec 20 2023 15:03:06.989 CET: %OSPF-5-ADJCHG: Process 1, Nbr 10.1.100.42 on TenGigabitEthernet1/1/2 from FULL to DOWN, Neighbor Down: Interface down or detached
000587: *Dec 20 2023 15:03:07.097 CET: %LINK-3-UPDOWN: Interface TenGigabitEthernet1/1/4, changed state to down
TEMP-CORE#
000588: *Dec 20 2023 15:03:07.099 CET: %OSPF-5-ADJCHG: Process 1, Nbr 10.1.100.42 on TenGigabitEthernet1/1/4 from FULL to DOWN, Neighbor Down: Interface down or detached
TEMP-CORE#
000589: *Dec 20 2023 15:03:11.346 CET: %LINK-3-UPDOWN: Interface TenGigabitEthernet1/1/1, changed state to up
000590: *Dec 20 2023 15:03:11.353 CET: %LINK-3-UPDOWN: Interface TenGigabitEthernet1/1/2, changed state to up
TEMP-CORE#
000591: *Dec 20 2023 15:03:12.345 CET: %LINEPROTO-5-UPDOWN: Line protocol on Interface TenGigabitEthernet1/1/1, changed state to up
000592: *Dec 20 2023 15:03:12.353 CET: %LINEPROTO-5-UPDOWN: Line protocol on Interface TenGigabitEthernet1/1/2, changed state to up
TEMP-CORE#
000593: *Dec 20 2023 15:03:13.324 CET: %LINK-3-UPDOWN: Interface TenGigabitEthernet1/1/4, changed state to up
TEMP-CORE#
000594: *Dec 20 2023 15:03:14.323 CET: %LINEPROTO-5-UPDOWN: Line protocol on Interface TenGigabitEthernet1/1/4, changed state to up
TEMP-CORE#
000595: *Dec 20 2023 15:03:21.591 CET: %OSPF-5-ADJCHG: Process 1, Nbr 10.1.100.42 on TenGigabitEthernet1/1/2 from LOADING to FULL, Loading Done
000596: *Dec 20 2023 15:03:22.089 CET: %OSPF-5-ADJCHG: Process 1, Nbr 10.1.100.42 on TenGigabitEthernet1/1/1 from LOADING to FULL, Loading Done
TEMP-CORE#
000597: *Dec 20 2023 15:03:23.798 CET: %OSPF-5-ADJCHG: Process 1, Nbr 10.1.100.42 on TenGigabitEthernet1/1/4 from LOADING to FULL, Loading Done
Even if you put the port in admin shut the copmlete quad still goes down.
workaround;
First remove only the 10G interface. Then when link is down remove the convertor.
Regards,
Wouter
