09-22-2024 10:17 PM
Recently i have competed IOS upgradation of cat 9300 switch after upgradation i got error like package is missing.
when i checked more package.conf file all files are present in file nothing is missing still getting error.
Also when i checked sh boot sys under boot sequence old file .bin also there and new package.conf also there.
09-22-2024 10:45 PM
Post the complete output to the following commands:
dir
more bootflash:packages.conf | begin rp_boot
09-22-2024 11:16 PM
Please find attached output
09-23-2024 12:19 AM
@Mayur Salunkhe wrote:
Please find attached output
Where?
09-24-2024 08:38 PM - edited 09-24-2024 08:38 PM
09-24-2024 10:07 PM
F.ck. I think DNAC erased everything.
This can be fixed easily.
1. Copy the firmware back into the switch.
2. Do the following:
conf t
software auto-upgrade enable
end
wr
3. Unpack the package:
request platform software package install switch all file flash:filename.bin on-reboot new auto-copy verbose
4. Confirm that the switch will boot the correct firmware:
more bootflash:packages.conf | begin rp_boot
5. Save the config.
6. Reboot
09-24-2024 10:12 PM
is there any another way without reboot when i checked files under package.conf all files are there shall i uploade .bin file and extract it into packages bcz under dir latest version bin file is delated.
09-25-2024 01:55 AM
Follow Steps 1 to Step 4 and it will put the package files back without a reboot.
This is a stack of 9300 -- Lady Luck shines down on you. Look at Step 3. Do you see the option "on-reboot"? (That's a bug: CSCve94966. It is suppose to say "NO-reboot".) If the option "on-reboot" is used, the process will extract all the packages from the BIN file and STOP. No reboot.
09-25-2024 03:20 AM
Please share with us the DNAC version or build number for references.
09-28-2024 09:39 PM
Hi Leo,
We are not using DNAC to upgrade device we have inhouse automation tool.
09-28-2024 04:13 AM - edited 09-28-2024 04:15 AM
09-28-2024 07:03 PM
conf t
service internal
end
clear install state
conf t
no service internal
end
wr
09-28-2024 07:04 PM
What is the DNAC version?
(This information is very important because some DNAC people are watching this thread.)
09-28-2024 08:39 PM
Hi Leo,
We are not using DNAC to upgrade device its inhouse automation tool.
Thanks
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide