cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
8502
Views
0
Helpful
2
Replies

Cisco DNA Plug and Play C9300

ardit
Level 1
Level 1

Hello Together

Currently I set up a DNA-PnP station to configure the Cisco 9300 switches.

Unfortunately the switches do not connect to the Cisco DNA.

This is the error message, I can't get any further!

 

Info: I changed the domain to domain.XYZ.xyz

 

*Sep 6 06:36:57.481: %SMART_LIC-5-SYSTEM_CLOCK_CHANGED: Smart Agent for Licensing System clock has been changed
CRYPTO_PKI: setting trustpoint policy TP-self-signed-2477683153 to use keypair TP-self-signed-2477683153% Generating 2048 bit RSA keys, keys will be non-exportable...
[OK] (elapsed time was 1 seconds)

*Sep 6 06:36:59.767: %PKI-2-NON_AUTHORITATIVE_CLOCK: PKI functions can not be initialized until an authoritative time source, like NTP, can be obtained.
*Sep 6 06:36:59.811: %CRYPTO_ENGINE-5-KEY_ADDITION: A key named CISCO_IDEVID_SUDI_LEGACY has been generated or imported by pki-sudi
*Sep 6 06:36:59.829: %CRYPTO_ENGINE-5-KEY_ADDITION: A key named CISCO_IDEVID_SUDI has been generated or imported by pki-sudi
*Sep 6 06:37:00.399: %CRYPTO_ENGINE-5-KEY_ADDITION: A key named TP-self-signed-2477683153 has been generated or imported by crypto-engine
*Sep 6 06:37:00.401: %SSH-5-ENABLED: SSH 1.99 has been enabled
*Sep 6 06:37:00.440: %PKI-4-NOCONFIGAUTOSAVE: Configuration was modified. Issue "write memory" to save new IOS PKI configuration
*Sep 6 06:37:00.507: %CRYPTO_ENGINE-5-KEY_ADDITION: A key named TP-self-signed-2477683153.server has been generated or imported by crypto-engine
*Sep 6 06:37:00.857: %PKI-6-TRUSTPOOL_DOWNLOAD_SUCCESS: Trustpool Download is successful
*Sep 6 06:37:00.861: %PNP-6-HTTP_CONNECTING: PnP Discovery trying to connect to PnP server https://pnpserver.domainXYZ.xyz:443/pnp/HELLO
*Sep 6 06:37:07.915: %PLATFORM_PM-6-FRULINK_INSERTED: 2x25G uplink module inserted in the switch 1 slot 1
*Sep 6 06:37:09.506: %AN-6-AN_ABORTED_BY_CONSOLE_INPUT: Autonomic disabled due to User intervention on console. configure 'autonomic' to enable it.
*Sep 6 06:37:10.722: %PKI-4-NOCONFIGAUTOSAVE: Configuration was modified. Issue "write memory" to save new IOS PKI configuration
*Sep 6 06:37:10.724: %CALL_HOME-6-CALL_HOME_ENABLED: Call-home is enabled by Smart Agent for Licensing.
*Sep 6 06:37:10.725: %SMART_LIC-5-COMM_RESTORED: Communications with the Cisco Smart Software Manager or satellite restored
%Error opening tftp://255.255.255.255/network-confg (Timed out)
*Sep 6 06:37:30.882: %PNP-6-HTTP_CONNECTING: PnP Discovery trying to connect to PnP server https://10.68.37.20:443/pnp/HELLO
%Error opening tftp://255.255.255.255/cisconet.cfg (Timed out)
*Sep 6 06:38:37.095: %PNP-6-HTTP_CONNECTING: PnP Discovery trying to connect to PnP server https://18.205.166.131:443/pnp/HELLO
%Error opening tftp://255.255.255.255/router-confg (Timed out)
%Error opening tftp://255.255.255.255/ciscortr.cfg (Timed out)
 

Thanks for your help!

1 Accepted Solution

Accepted Solutions

I fixed the problem.
I put in the DHCP option 43 the NTP-Server with the „Zxxx.xxx.xxx.xxx“ parameter.

View solution in original post

2 Replies 2

Preston Chilcote
Cisco Employee
Cisco Employee

What is the enterprise IP or VIP (if configured) of your DNAC?

I fixed the problem.
I put in the DHCP option 43 the NTP-Server with the „Zxxx.xxx.xxx.xxx“ parameter.

Review Cisco Networking for a $25 gift card