Configuring Lightweight APs using Catalyst Center

[Chris Terry]

I know changing the name and other radio parameters is an option through the "Configure Access Points" workflow.

I was wondering if you could also configure things such as AP Group Name, AP mode, and AP location using Catalyst Center?

WLC: Cisco 5520
APs: C9120AXI-B and AIR-AP3802I-B-K9

[balaji.bandi]

check the matrix :

https://www.cisco.com/c/dam/en/us/td/docs/Website/enterprise/catalyst_center_compatibility_matrix/index.html

WLC 5520 is EOL so you need to hear towards Migrating to WLc 9800

Catalyst center and WLC 9800 is possible - if you looking for Migration.

[Torbjørn]

You can't set these directly AFAIK. They will all be a result of where your AP is assigned and what settings you select under "network settings" > "Wireless"