DNA Center - ISE Cluster Integration

[Eoin.Quinn]

Hi Guys

W're trying to figure out the settings for integrating DNAC with our ISE environment and keep hitting walls with it.

Our ISE environment is setup with ISE01 (PAN), ISE02 (Primary Monitoring) and ISEPX (Just PXGrid). They all have sightly different FQDNs and there are no load balancers.

We've tried pointing just at just the PAN, just the PXGrid, the PAN with the PXGrid as the virtual IP but all just fail with very little information.

Does anyone know if theres recommended settings for this deployment as all the samples and labs we've done just have single node clusters which would make life easier.

Cheers!

Eoin

[Mike.Cifelli]

Take a peek at this: https://community.cisco.com/t5/networking-documents/how-to-cisco-dna-center-ise-integration/ta-p/3896410
Also, for additional SDA resources see: https://community.cisco.com/t5/networking-documents/sd-access-resources/ta-p/3812030#Design

HTH!