09-27-2022 12:16 AM
Hi,
We have an existing Wireless deployment using flexconnect APs & WLCs that was provisioned before our DNA infrastructure.
We have successfully imported the WLC's into DNA center but how can we import the APs and assign to floors?
The DNA centre discovery process sees the APs but cannot complete the discovery due to cli/snmp required credentials. It's my understanding the AP's can't be assigned this information themselves. So what is the procedure for brown field WiFi deployments like ours and integration into DNA. Do we have to rebuild via DNA to make the WAPs visible?
Thanks in advance
Solved! Go to Solution.
09-28-2022 10:50 AM
If the WLC is correctly sending telemetry information to Cisco DNA, then the APs will be added to inventory automatically. You don't need to manually discover the APs. Please open a TAC case to investigate.
09-28-2022 10:50 AM
If the WLC is correctly sending telemetry information to Cisco DNA, then the APs will be added to inventory automatically. You don't need to manually discover the APs. Please open a TAC case to investigate.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide