04-14-2020 05:00 PM
Hello everybody,
I tried to deploy my access switch using PnP 0-day provision. I prepared my template using Cisco Guide i make 0-day provision;
All things are happend as expected :
* PnP descovery and all PnP opération, connectivity
* Image update, template provision
* Credantials, vlans configuration and shared services.
Now the directed interface connected to the upstream device is configured as expected, but the other interfaces where i had specify either Trunk or access are not configured.
When i issue show run interface or th Sh inter g1/0/X command i find the following default congifuration ( same for all interfaces except for the uplink interface where the managed device is connected forwword DNA Center) :
interface GigabitEthernet1/0/25
device-tracking attach-policy IPDT_MAX_10
!
interface GigabitEthernet1/0/26
device-tracking attach-policy IPDT_MAX_10
!
interface GigabitEthernet1/0/27
device-tracking attach-policy IPDT_MAX_10
!
interface GigabitEthernet1/0/28
device-tracking attach-policy IPDT_MAX_10
Is anyone have the same issue? i will be gracefull if someone can help to ressolve this problem and being able to set the correct configuration?
Here my original templates :
ostname $hostname
!
!
vlan ${Mgmt_Vlan}
name mgmt
!
vlan ${Data_Vlan}
name Data
!
vlan ${Secure_Vlan}
name Security
!
vlan ${Voice_Vlan}
name Voice
!
vlan ${Wifi-LAN_Vlan}
name WiFi_LAN
!
vlan ${Wifi-VIP_Vlan}
name WiFi_VIP
!
vlan ${Wifi-Apple_Vlan}
name WiFi_Apple
!
ip ssh version 2
snmp-server community Community RO
snmp-server community Golden123 RW
!
!
line vty 0 4
login local
transport input ssh
!
!
line vty 5 15
login local
transport input ssh
!
ntp source Vlan99
ntp server 192.168.200.100
ntp server 192.168.210.16
!
interface GigabitEthernet1/1/1
description Connect-to-Uplink
switchport trunk native vlan ${Mgmt_Vlan}
switchport trunk allowed vlan ${Mgmt_Vlan},${Data_Vlan},${Secure_Vlan},${Voice_Vlan},${Wifi-LAN_Vlan},${Wifi-VIP_Vlan},${Wifi-Apple_Vlan}
switchport mode trunk
no shutdown
logging event trunk-status
!
interface range $interface_type1 $port_range1
description Connect-USER_ToIP
switchport access vlan ${Data_Vlan}
switchport mode access
switchport voice vlan ${Voice_Vlan}
spanning-tree portfast
no shutdown
!
interface range $interface_type1 $port_range2
description Connect_to_WiFi
switchport trunk native vlan ${Mgmt_Vlan}
switchport trunk allowed vlan ${Mgmt_Vlan},${Wifi-LAN_Vlan},${Wifi-VIP_Vlan},${Wifi-Apple_Vlan}
switchport mode trunk
no shutdown
!
interface range $interface_type2 $port_range3
description Connect-to-Uplink
switchport trunk native vlan ${Mgmt_Vlan}
switchport trunk allowed vlan ${Mgmt_Vlan},${Data_Vlan},${Secure_Vlan},${Voice_Vlan},${Wifi-LAN_Vlan},${Wifi-VIP_Vlan},${Wifi-Apple_Vlan}
switchport mode trunk
no shutdown
logging event trunk-status
!
interface vlan${Mgmt_Vlan}
ip address ${Mgmt_IPAddr} 255.255.255.0
no shutdown
!
ip default-gateway ${Dafault_GW}
ip http server
ip http secure-server
ip http client source-interface Vlan${Mgmt_Vlan}
ip ssh source-interface Vlan${Mgmt_Vlan}
!
pnp profile pnp-zero-touch
transport https ipv4 172.16.128.200 port 443 source Vlan${Mgmt_Vlan}
Solved! Go to Solution.
04-21-2020 07:02 PM
04-30-2020 01:47 AM
Hello Mike,
I don't use a fabric. it is a classical nework with PnP automation. The problem is solved, Thank you.
The issue was with my template : I missed the caracter "!" at the end of my template.
Now i had deployed about 10 devices.
Thanks
04-21-2020 07:02 PM
04-30-2020 01:47 AM
Hello Mike,
I don't use a fabric. it is a classical nework with PnP automation. The problem is solved, Thank you.
The issue was with my template : I missed the caracter "!" at the end of my template.
Now i had deployed about 10 devices.
Thanks
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide