Firmware for switch Cisco Catalyst WS-C2960-8TC-L

[BePeter]

Hi! I'm looking badly for Cisco Catalyst WS-C2960-8TC-L firmware.
Corrupted one was c2960-lanbasek9-mz.122.50.se4
Can you share it for me?
Peter

[Kasun Bandara · Accepted solution]

@BePeter hi, is your model 2960C-8TC-L ? recommended OS version for 2960C-8TC-L this model is 15.2.7E10. you can download it at 

https://software.cisco.com/download/home/283915790/type/280805680/release/15.2.7E10

if your switch is exactly 2960-8TC-L, that model reached EOS on 2018. still cisco site have IOS for 48 port model. you can try that since that OS normally for all models in series. but not recommended  as that OS released on 2017, not updated after that, and its not specifically mentioned that supports for 8 Port model- https://software.cisco.com/download/home/279963472/type/280805680/release/12.2.55-SE12

[BePeter]

Thank you for quick response.
No it is an old model 'WS-C2960-8TC-L'. Without 'C' in name after 2960.
It was manufacured on 2011

[Kasun Bandara]

@BePeter mmm ok. i updated my response for that model. 

'that model reached EOS on 2018. still cisco site have IOS for 48 port model. you can try that since that OS normally for all models in series. but not recommended  as that OS released on 2017, not updated after that, and its not specifically mentioned that supports for 8 Port model- https://software.cisco.com/download/home/279963472/type/280805680/release/12.2.55-SE12'

[BePeter]

This IOS is OK.
Thank You very much.
Have a nice weekend

[Leo Laohoo]

IOS files for 2960 can still be downloaded (a valid Service Contract required).  

There are two universally-recognized stable IOS trains, they are:  

1.  12.2(55)SE train; or
2.  15.0(2)SE train.

Good luck.

[BePeter]

Yes. They work. Thank you