remove stack member from 3850

[awojtowicz]

i had a stack of 2 3850's.  i took one switch out but now i cant run the no switch 2 provision command.  says no "switch" command?

Switch# Role Mac Address Priority Version State
-------------------------------------------------------------------------------------
*1 Active 00e1.6d30.8a00 15 V03 Ready
2 Member 0000.0000.0000 0 Provisioned

[Dustin Anderson · Accepted solution]

Looks like it's done under config mode.

Switch# Role Mac Address Priority Version State
-------------------------------------------------------------------------------------
*1 Active 00bf.7704.9680 15 V08 Ready
2 Standby 20bb.c000.9300 14 V02 Ready
3 Member bcc4.93aa.bf00 1 V05 Ready

FarA#no sw
FarA#config t
Enter configuration commands, one per line. End with CNTL/Z.
FarA(config)#no sw
FarA(config)#no switch pro
FarA(config)#no switch ?
<1-9> Switch Number

FarA(config)#no switch 3 ?
provision Configure Switch provision / offline config

FarA(config)#no switch 3