Hello everyone !I've been trying to schedule discovery on dna center 2.3.3.7 however I don't really understand how it works.I'd like to make it recurrent, but there is no explicit documentation on how to do it. When I set a daily interval of 1 for ex...
Forum Posts
Hey all,I'm currently studying for a diploma and right now we are doing CCNA, using Packet Tracer. I just have a few questions in which I cannot wrap my head on - and am having trouble looking it up online (maybe I just don't know what are the correc...
hii have issue in my router that configure through DNA, that i can`t manage it because there is netconfig issue.i face 2 errornetconf authentication failed cisco dna israndDevice Unresponsive : NCIM12011 cisco dnai can`t make sych to this device
Resolved! DNAC Upgrade Restore from Backup
Hi all,We are looking at rebuilding our DNAC cluster. One of the 3 nodes has died and must be replaced and there are few errors from failed upgrades from the past. Having said that we have invested considerably time in setting up the sites, floor di...
HiWe are deploying an SDA fabric that will be handed off to an existing fortinet firewall as a fusion device. Is it possible to extend the SGT information to the fortinet then we can use the SGT’s in the firewall rules? If so how do we extend the S...
Resolved! Maglev cli
HiHas anything changed with DNAC and maglev commands? I’ve not logged into the cli on our DNAC for some time and we have had several updates since. We are at the latest version currently. Yesterday I had an issue and wanted to run a tcpdump. So I...
Hello,Can I increase the timeout for it? Right now I see that the timeout is about 40 minutes.
HiWhen I configure a Transit and do a L3 IP handoff via DNAC it only offers me the option to automate it with BGP. Can I assume I am free to manually configure a different handoff using, for example, OSPF? So I would configure the addressing, svi's...
Hi Everyone,I am trying to get the Information where an AP is connected on (Switch, Port) via an API call in DNAC.Does anyone any Idea how to get this?I spent too much time as it is to find any information in the API doku for this.Here is a screensho...
Resolved! DNA center LAN automation SDA
Hi Guys,So currently a customer is migrating to DNA center with completely new switches.but for the last 32 switches and with these we had the following process:select your seed device > select the port of the switch > IP pool, hostname etc.and then ...
Resolved! Setting up DNA as Syslog server
Could someone link me to documentation that shows how to set up DNA as a syslog server? We're moving away from Prime and Solarwinds and I'd like to use DNA Center for syslogs. The only documentation I can find is how to point DNA to an external syslo...
Good day, Has anyone else seen this behavior? We have a customer using DNAC to configure their SSIDs on WLCs with AireOS 8.10.x. On one of the SSIDs the WPA2 PSK should be changed regularly. However, changing this setting in DNAC for the SSID under t...
Hello, By default DNAC polls a network device via SNMP every 10 minutes on many OIDs. For low-end or legacy switches running old IOS version (C3650 - IOS-XE 3.6.8E for example), I see SNMP CPUHOG on a few specific OIDs. These CPU spikes lead to some ...
Hello everyone,When I import a new image into DNA Center then assign it to a device family that's not already created, nothing happens.I was expecting to see a new family created, so I can use the image during pnp.Does anyone know how to solve this p...
It is possible to change the automatic compliance scan from Saturday at midnight to some other time? I have a programmed maintenance window in my FW that is at a different time during the week. I have not been able to get my EoX scans to complete e...
