04-16-2015 08:10 AM - edited 03-12-2019 07:19 AM
Hello All,
I'm doing some tests with a CSR1000v, and I was able to bring up the peering in the EVPN AF, however it seems not to work and I cannot find anything in the release notes stating that it is supported. Does anyone knows if EVPN AF is supported on the CSR1000v?
Thanks!
Cheers,
PM
Solved! Go to Solution.
05-15-2015 11:31 AM
I checked with the experts - unfortunately CSR does not support EVPN AF.
05-05-2015 04:29 PM
I dont believe we can support EVPN in AWS. AWS does not allow Layer 2 connectivity.
05-11-2015 05:08 AM
Hi Nagaraj,
Sorry this was probably not the best place, but I was asking about the CSR generally and not specifically about the AWS flavour.
Cheers,
PM
05-15-2015 11:31 AM
I checked with the experts - unfortunately CSR does not support EVPN AF.
05-15-2015 11:36 AM
Thx for your help Nagaraj!
08-15-2018 10:24 AM
I think this feature is there on ASR1000, but can you confirm this is still not supported on CSR please ?
08-01-2019 04:44 AM
Hi All,
I am Using Cisco CSR 1000v (Cisco IOS XE Software, Version 16.09.03).
Does it have EVPN VxLAN support ?.
As i was following few steps to configure EVPN and found that we don't have CLI commands to configure vlan to vni mapping !
needed CLI command: "fabric forwarding anycast-gateway-mac 2020.0000.00aa" , "vlan <vlan-number> ==> vn-segment" , "vrf context <name> ==> vni <vni_number>".
are there any alternate CLI for above.
Any help will be appreciated.
Thanks
Vikram
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide