11-29-2020 12:23 PM
Hello guys,
I have deployed a CSR1000v on Azure Cloud. I cannot get an incoming call on the SIP Trunk working. The necessary ports on the Azure Network Security Group are opened. However I do not see any SIP packets (IN/OUT) on the vCUBE.
When using ISR4K Router, the SIP Trunk works fine with no issues.
The vCUBE has 1 interfacewith a private ip on the inside and public ip on the outside.
I can telnet the providers registrar IP's on port 5060 from vCUBE.
When making call from PSTN to the vCUBE, the provider sends a request timed out error.
Unfortunately at this time, I cannot test the outgoing calls.
I am using google dns in the vCUBE.
I did few tests already on Azure using several Network testing tool and the inbound and outbound rules seems to be fine.
Has anyone deployed such a vCUBE on Azure and is there any specific config on the Azure maybe I am missing?
Solved! Go to Solution.
11-29-2020 11:28 PM
11-29-2020 11:28 PM
11-30-2020 12:14 AM
Thank You but it seems to work for others with some Caveats ofcourse.
My issue seems to be more on Azure side as I see that Azure is rejecting the packets due to Network Security Group inbound Rules.
But I will still accept it as an answer as officially it isn't yet supported.
Thanks.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide