cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
5934
Views
5
Helpful
15
Replies

Troubleshooting High CPU Utilization on Cisco CSR1000V Series

aspetukhov
Beginner
Beginner

Hello everybody.

I have some troubles with CPU utilization on a Cisco CSR1000V Series Router. It periodically rises up to 100%. I found out a pair of documents about troubleshooting techniks for this kind of issues. These articles are: Troubleshooting High CPU Utilization on Cisco RoutersTroubleshooting High CPU Utilization. But I think that in the case of CSR1000V those articles are not so usefull and they have not helped me a lot. Mostly because this is a virtual machine that is executed on VMWare, but those articles are for "hardware" Routers.
Can anybody recommend me a good article about troubleshooting high CPU utilization for CSR1000V Series or for a Virtual Router?

P.S.: I tried to find something relative on Cisco-site, but found nothing. Maybe I have overlooked something. If so, please point out it.

Update: Some articles were beign advised to me but there are some small inaccuracies

http://www.cisco.com/c/en/us/support/docs/ip/simple-network-management-protocol-snmp/116213-trouble-asr-eem-00.html

http://www.cisco.com/c/en/us/support/docs/ip/simple-network-management-protocol-snmp/118901-technote-snmp-00.html

Update 2:

As a starting point for troubleshooting can be used: Cisco docwiki CSR1000V:Home

15 Replies 15

I think you have done everything that you can.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: