I have two ASAv firewalls setup in CML 2.2 for Active/Standby Failover. The firewalls sync no problem and I can manually failover between the firewalls using the "failover active" command. The firewalls don't failover automatically, however. For instance, if I delete the link on the outside interface of the active firewall, it stays active.
Is this supported in CML? Perhaps it doesn't work due to the CML quirk where interfaces stay "up" all the time, even if there is no link to the interface.
Packet loss with local-proxy-arp enabledHi allI want to expose you an issue i found using local-proxy-arp in a vpn remote access.The difference between local proxy-arp and local-proxy-arp is that using normal proxy arp the router sets his mac-address to a...
A demonstration video illustrating the deployment of Cisco Modeling Labs r1.3 onto a bare metal Cisco UCS C220-m4 server using the ISO distribution media. Video accellerated to approx. 12.5 minute duration.