cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
640
Views
0
Helpful
0
Replies

External Connectivity Issue // CML Node Unable to Ping Gateway

ShaneFroebel
Level 1
Level 1

Dear Fellow Cisco CML Users & Cisco -

 

I usually I am able to solve these issues, but I am at a lost and need help. I have setup Cisco CMLv2 inside my ESXi Enviroment. It has two NICs:

 

* Web and Management - VLAN Y

* CML Node External Network - VLAN 523

 

On the ESXi side the VLAN is tagged and the links through he Cisco UCS/FI down to the Nexus 7k are trunk to the port from the FI.

 

2020-12-18 08_45_39-BHDATANEXUS02-AGR.png

 

As you can see the "VLAN" is in the allowed state and below.. is the SVI;

 
 

2020-12-18 08_43_17-BHDATANEXUS02-AGR.png

 

HSRP is running and this SVI is currently ".1".

2020-12-18 08_48_27-BHDATANEXUS02-AGR.png

 

So that's good. I do see my nodes in CML getting the DHCP address from the DHCP servers,

However, the node (NX-9000v) can not ping the GW, but the normal .3 address of this particular switch.

 

 

2020-12-18 09_06_21-CML².png2020-12-18 09_05_25-CML².png

 

Arp Table:

BHDATANEXUS02-AGR# show mac address-table vlan 232
Note: MAC table entries displayed are getting read from software.
Use the 'hardware-age' keyword to get information related to 'Age'

Legend:
* - primary entry, G - Gateway MAC, (R) - Routed MAC, O - Overlay MAC
age - seconds since last seen,+ - primary entry using vPC Peer-Link, E - EVPN entry
(T) - True, (F) - False , ~~~ - use 'hardware-age' keyword to retrieve age info
VLAN/BD MAC Address Type age Secure NTFY Ports/SWID.SSID.LID
---------+-----------------+--------+---------+------+----+------------------
G 232 0000.0c9f.f0e8 static - F F sup-eth1(R)
G 232 002a.6aa4.f243 static - F F vPC Peer-Link(R)
G 232 002a.6aa5.1042 static - F F sup-eth1(R)
* 232 0050.56a3.88c7 dynamic ~~~ F F Eth1/48
* 232 5254.0008.1d8d dynamic ~~~ F F Eth1/48
* 232 5254.000a.32f9 dynamic ~~~ F F Eth1/48

BHDATANEXUS02-AGR#

 

Thanks,

Shane

0 Replies 0