nothing happens when i press enter in CML2 on console tab

[dolanduck.]

hello i recently bought cml2 and i cant get none of my nodes to start i think. i see them boot up the green circle with 2 arrows but that's about it they stay in that state and console tabs says to press enter but nothing happens.

i have 16 GB of ram i gave cml2 10GB and 6 cores

i have a fx8350 8 core

and 16 gb of ram

and 1070

[balaji.bandi]

explain more about your setup, how you installed ? esxi or VMware workstation :

*Must support VTx and EPT or AMDv and RVI. These CPU flags are required for nested virtualization.

have you look at the installation guide ;

https://www.cisco.com/c/en/us/td/docs/cloud_services/cisco_modeling_labs/v200/quick/start/b_cml_quick_start_2-0/m_deploy_and_configure.html

[dolanduck.]

i used vmWorkstation pro and i followed this guild when i was installing cml2

[balaji.bandi]

watch the video step by step :

https://www.youtube.com/watch?v=H1N1x9kt-pY

[dolanduck.]

ok i got it to work david did not say to turn on vm cd /dvd thing and i was not booting up the individual nodes

[balaji.bandi]

Not sure the answer i read correctly, is this working still has issue?