09-20-2018 09:08 AM
We have NX-SO 7K that has 4VDCs and I am trying to implement SNMP V3 on the switch. Does anyone have the instruction and the configuration to implement SNMP v3? Also does it need to be implemented on every VDC or just the main (Default) switch where ports gets assigned to other VDCs ?
09-21-2018 12:38 AM
This is good example guide for your reference to start with :
vDC means you make 1 device in to 4 device, that means each vDC act as own switch. if you want to manage 4 vDC, you need to configure management for the same separate.
09-21-2018 08:40 AM
unfortunately that is for 5K where there are no VDCs, I need to know if I need to setup SNMP v3 on every VDC or just the main admin one.
09-21-2018 09:19 AM - edited 09-21-2018 09:20 AM
The document i was referering the NXOS command reference to configure SNMP v3
For vDC - I have answered :
vDC means you making 1 device in to 4 device, that means each vDC act as own switch. if you want to manage 4 vDC, you need to configure management in each vDC .
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide