Cisco AP 2600i series autonomous IOS

[TotalEdge]

I was given a couple of old access points from a friend of mine.  They are currently light weight, so I am in need of converting them.  I understand how to do that, as we are a Cisco shop, I just need the software.  When I login, with my work or personal account, I can download the Lightweight version but not the other.  TIA.

[balaji.bandi]

Either you need to contact a local partner, if you know the exact name, or google it you will find the images to download (at your risk some are good and some not as expected).

[Leo Laohoo]

Autonomous IOS for the 2600/3600/2700/3700 can be found HERE.

NOTE:  2600/3600/2700/3700 share the same IOS code.  

[TotalEdge]

I know where I can get it, but I need to contact a local partner.  Seems like Cisco on a device that is EOL and <$30 on ebay/ Amazon to have the software available freely.  This is a throw away device that would be fun to learn on.  Frustrated at best.

[Leo Laohoo]

2600/3600 are not "throwaway" commodities.  The components inside are far more reliable than the 2700/3700.  

Not everyone knows that the 2600/3600 share the same firmware as 2700/3700.  This means autonomous IOS "meant for" 2700/3700 can be easily used for the 2600/3600.  

Get the filename of the version of your choice and enter it into a internet search engine.  See where it takes you.