Cisco UCS SNS-3615 boot menu for ISE disappeared after firmware update

[crodrigues]

Hello to all,

I update a Cisco UCS SNS-3615-K9 using the ISO: SNS-36xx-HUU-4.2.2a_ISE.iso

After the reboot, the UCS boots into UEFI Shell instead of installed OS (ISE).

I allreay reinstall the ISE, but is still boot UEFI shell.

Compared with the other ISE machine, the boot table is completed destroyed, how can I recreate it, since the ISE installation is not doing it?

Thanks.

[LisaGuadagna54245]

How did you fix this issue. I have the same. Thanks

[crodrigues]

Hello,

You need download the BIOS for ISE, example: C220M5.4.1.3e.0_ISE