cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
2139
Views
3
Helpful
9
Replies

Networking Basics 14.3.3 Packet Tracer

MongSkyyy
Level 1
Level 1

I'm experiencing a stuck problem on the module I'm working on, did I make a mistake or am I still missing something?

My current position is stuck at 83%My current position is stuck at 83%

1 Accepted Solution

Accepted Solutions

@MongSkyyy hi, this can be due to missing configurations as required by the activity, or mistake in marking criteria. try to check the configurations again to make sure that you completed all required configurations and if issue still persists, contact your instructor.

Please rate this and mark as solution/answer, if this resolved your issue
Good luck
KB

View solution in original post

9 Replies 9

@MongSkyyy hi, this can be due to missing configurations as required by the activity, or mistake in marking criteria. try to check the configurations again to make sure that you completed all required configurations and if issue still persists, contact your instructor.

Please rate this and mark as solution/answer, if this resolved your issue
Good luck
KB

Thank you for helping bro

 

MongSkyyy
Level 1
Level 1
 

Thanks @MongSkyyy for the file

Best regards
.ı|ı.ı|ı. If This Helps, Please Rate .ı|ı.ı|ı.

@MongSkyyy 

If you clic here:

M02rt37_0-1700665706903.png

You will see what you have to finish !

Best regards
.ı|ı.ı|ı. If This Helps, Please Rate .ı|ı.ı|ı.

Thank you for giving me the direction bro

M02@rt37
VIP
VIP

@MongSkyyy 

 

M02rt37_0-1700667347981.png

 

Best regards
.ı|ı.ı|ı. If This Helps, Please Rate .ı|ı.ı|ı.

I have tried changing the IP address but there has been no improvement so far, maybe there are suggestions on how to solve it?

david-villam50
Level 1
Level 1

tengo el mismo problema alguna solución ?