10-18-2021 05:32 AM
Hi,
I'm currently running Prime v3.4 and intend to upgrade to 3.9.
I believe you cannot upgrade directly to 3.9 due to security vulnerabilities that exist in 3.4.
Therefore I would need a new 3.9 build and then restore from a backup of your current build (3.4)
Cisco release notes mentions restoring from 3.8/3.9 into 3.9 but does not mention earlier versions you can restore from.
Does this mean I would need to upgrade our current 3.4 build to 3.7/3.8 before I can take a backup to restore to 3.9 ?
Thanks
10-18-2021 06:29 AM
I believe you cannot upgrade directly to 3.9 due to security vulnerabilities that exist in 3.4.
- yes you can not do in line upgade from 3.4 to 3.9
Therefore I would need a new 3.9 build and then restore from a backup of your current build (3.4)
- The backup of 3.4 not going to work on 3.9
Does this mean I would need to upgrade our current 3.4 build to 3.7/3.8 before I can take a backup to restore to 3.9 ?
yes - 3.4 to 3.7 inline upgrade, take appliance backup of Prime 3.7, install new 3.9 and resore, it works as expected
Make sure you have enough time 3.4 backup and restore take 14 hours , each upgrade dabase resotre take little time be patient.
3.9 restore of 3.7 backup take aorund 6 hours.
Note : Keep the backup safe and out of the box, make sure you remember the password set up for backup.
good thread :
https://community.cisco.com/t5/network-management/prime-infrastructure-upgrade/m-p/4407116
10-28-2021 07:16 AM
Thank you Balaji,
Very helpful.
Presumably, I dont need to patch to 3.7.1. If I upgrade to 3.7 and take a backup to restore to 3.9 that will be ok ?
Thanks
10-28-2021 09:23 AM
yes that what i did, and it works as expected, Make sure backup is tested (i know it pain)
also if you have any templates, maps, license take backup also out of the box to be safe.
10-29-2021 01:56 AM
Thanks Balaji,
I thought templates, maps and license would be included would be included in the application backup ?
If not how do you backup these ?
We have ftp remote backups so that side of things is ok.
Got an issues with ftp to the box if you can assist ?
Trying to transfer the upgrade via ftp onto the box and get a 530 permission dened. All login details are correct.
I configured a localftp repository as below:
repository localftp
url disk:/ftp
user xxxxx password hash xxxxxxxxxxxxxxxxxx
Everything seems what, ftp connects but 530 permisson denied.
What have missed ?
Thanks
Paul
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide