ā06-17-2024 04:54 AM
Hi folks,
I'm trying to install the new SSM On-Prem 9 based on Alma-Linux to get rid of the last Cent-OS we're using. I configured a virtual machine based on the provided installation instructions as far as this was possible (@Cisco: Selecting "Other 5.x or later Linux (64 bit)" doesn't allow you to use UEFI!). After deactivating secure boot I finally managed to get to the boot screen. But any option I choose, the VM just reboots and installation doesn't start. Does anyone have the same problem an maybe can give me some pointers?
Regards
Stephan
Solved! Go to Solution.
ā09-30-2024 09:15 AM
Forgot to post this. CISCO released an AMD compatible version. This one is working but you have to update it afterwards to the newest release. Thank you TAC
ā06-19-2024 01:10 AM
Hi Stephan,
Thanks for the tip to disable Secure boot, I got it booting and installing just fine after that. Maybe check if the file is corrupted? Sorry that I'm unable to help you further. I also used suggested Other 5.x or later Linux (64-bit) and I am using vsphere 8.x
Cheers,
seppo
ā06-27-2024 05:06 AM
Hi seppo,
unfortunately I was not able to get it going, though I'm using roughly the same setup as you. So I opened up the ISO and replaced the "isolinux" and "images" folder with the originals from AlmaLinux 9.3. Afterwards I was able to run the installation and it went through without errors. Success!? Not yet... Now if I start the machine it is stuck within the same boot loop as installation before. Since swapping some files at least got the installation going I'm pretty sure the problem ist not our setup but the crappy ISO. CISCO must have released this in kind of a hurry or why is the ISO still named "CentOS 7 x86_64".
Seems the "Q" in "CISCO" stands for "Quality"...
I'm filing a claim with TAC as soon as possible and keep you posted.
Stephan
ā07-05-2024 10:07 AM
Hi Stephan,
Are you by any chance still booting on the installation image instead of the disk you have created for the VM?
Regards,
ā07-05-2024 10:15 AM
Wish it was that easyā¦
Sorry, no. That was the first thing I've checked. TAC is involved, but no help so farā¦
ā07-05-2024 10:34 AM
Yeah thought soā¦
Could you share what you have replaced the folders names with?
Thanks!
ā07-05-2024 11:01 AM
Have replaced āisolinuxā and āimagesā 1:1 from the original AlmaLinux installation disk. Nothing elseā¦
ā07-22-2024 12:11 PM
Hey Stephan,
Did you have any luck with TAC? We are also experience this as well
ā07-22-2024 12:24 PM
TAC is on it after I reminded them. But no help so far. I assume we're doing the checklist. Going through installation procedure, comparing checksumsā¦
I'll keep you guys posted here.
ā07-22-2024 12:34 PM
Ok, typical for TAC, lol. We seemed to have it working. Created a vCenter AlmaLinux 64 but before you create the image you change it from EFI to BIOS and then let it create. We can then run the setup just fine, So far so good. We also did not change the ISO.
ā07-24-2024 08:09 AM
Sorry but I didn't get this:
You created a new VM using AlmaLinux64 as OS and changed firmware to BIOS. After creating the VM you mounted the ISO, let it run and it worked?
Lucky you, I just tried that way but no chance, it keeps on rebooting...
ā07-24-2024 08:27 AM
Yeah, so, we tested it two ways. First was HyperV, normal, create new VM and off it went, no issues. Then went to VMware. But a normal VM it wouldn't even boot from ISO. So as you are creating a new VM, you select the AlmaLinux then change the boot option to BIOS instead of EFI, then save the vm. We then went in and selected the ISO as a boot device and it worked. By default it had selected the "test" menu item and you have to select the one above it. That's all we did.
ā07-24-2024 11:41 AM
One step further. Got an old ESXi 6.5 and right now it's installing fine. Hopefully I can move the VM to the cluster. I keep you postedā¦
ā07-25-2024 08:16 AM
This is getting pretty annoying. I installed the ISO successfully onto an old ESXi 6.5 and got it running. So I stopped the vm, created an OVF and moved it to our cluster. But when I start the machine here I get the same error and the system keeps on rebooting. TAC is quiet since two days. Hope the get it going 'cause I'm out of options here...
ā07-25-2024 08:27 AM
That sucks man. We are running 8.0.3.00000 of Vsphere, but 8.0.2, 233055 of ESX, not sure if that has anything to do with it.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide