student requesting for Cisco packet tracer configuration assignment

[Arn2x]

Hello,

Can anyone here by any chance would be able help me with my cisco packet tracer configuration assignment?

i can upload the packet tracer file

Thanks in advance

[Flavio Miranda · Accepted solution]

Here we go

[Arn2x]

Thank you so much! I appreciate your help.

[Flavio Miranda]

You may need to label the vlans and make some change your teacher may ask but the overall idea is there.

[Arn2x]

Hi Flavio, can you please configure the dhcp? i cannot ping each other seems like dhcp is not working 

[Arn2x]

teacher said create extended ACL so that no client can ping IT vlan pc's but IT  pc's can ping all clients

[Arn2x]

Hi Flavio,

I am trying to configure DHCP pool on Router 3 and 4 but it is not working can you please help me configure dhcp 

attached is the packet tracer file

Thanks in advance

[Flavio Miranda]

It is all there. DHCP on routers, ACL. It is all working.

What might happen is when you save my file and open in your PC, the pkt file may not keep everything up.

 Basically you need to check all the PCs and see if they got IP address. If not, you need to force them to do so.

 You can use the commamd ipconfig /release and ipconfig /renew, this command you run on each PC

change it to DHCP if required

[Arn2x]

Hi Flavio,

I tried to force on the command prompt and still getting dhcp request failed, on the desktop settings ip configuration it is set to dhcp, i have attached the packet tracer file, can you please check? Thank you

[Flavio Miranda · Accepted solution]

Hi @Arn2x , sorry. The way I built the Access List it was also blocking the DHCP traffic.  It might work now.

Let me know

[Arn2x]

ok thank you flavio

[Arn2x]

Hi Flavio,

Can you please help me with my new assignment?

i already created the network topology on packet tracer, 

i will attached the pkt file and the assignment configuration instructions

Thank you in advance

[Flavio Miranda]

Hey @Arn2x , of course. Let me take a look

[Arn2x]

wait i will send you my updated packet tracer file, the labels on the switches is not yet updated on that pkt file i sent to you

[Arn2x]

attached is my updated packet tracer file

[Flavio Miranda · Accepted solution]

Hi @Arn2x 

 I worked on the first file you attached.

I believe 95% is there, you may need to check a few things only.

Let me know if you need any help