How to use two different data-line on active/passive
How can i use two different data-line which are mpls and lte on active and passive mode. I mean when i use mpls line for the data traffic my lte line's bgp neighbour will be shutdown. If i lost the mpls, lte will become up. I don't want to use two lines at the sametime because of my lte quota isn't enough. I try to do this with EEM with bgp neighbority status on lines. But sometimes (i don't understand why) bgp peer down log that i trace for gettin up lte peer wasn't be created. Is there any other to do this???
Cisco Proximity 2.0.8 includes some changes to the Windows installation package to facilitate mass deployment. None of these changes break backwards compatibility. The changes are these added msi properties:
LAUNCHPROXIMITY (Default: 1)
If set to 0, pr...
The Cisco Technical Support mobile application for iOS and Android devices provides access to our most frequent support tools and information while you are on the go. Several features are freely accessible by anyone including access to the Cisco...
Cisco Proximity Troubleshooting Guide
Cisco Proximity is a technology that allows the user to control an endpoint, receive content (presentation) directly onto a mobile device and share content wirelessly from a PC or MAC client, the...
With the new Responsive Design, the Cisco Support Community is no longer accessible through the Technical Support App.For fast access -- Add to Home Screen or bookmark the Cisco Support Community.With responsive technology, the Cisco Support Communit...