Noticed a typo in a Knowledge Base Article

[Mr_IT_Guy]

Noticed there is a small typo in a database article:

In the table of contents, step 2 has both 2 and 3 listed making the remainder of the list be off by one number. Didn't know who to contact at Meraki about it, so I thought I'd post here since @CarolineS1 and @daviscot are so active.

[daviscot]

Thanks @Mr_IT_Guy I'll bounce this to the documentation team!

[cammoody · Accepted solution]

Hey @Mr_IT_Guy,

That's me. I fixed it, thanks very much for the suggestion.

There was a mis-labeled header there.

If you ever want to point out a suggestion, feel free to @me or DM me.

[Roska]

Seems that MR42E and MR53E product pages have mixed ordering info on skus: MR42E -> MR53E-HW and vice versa.

https://meraki.cisco.com/products/wireless/mr42e#tech-specs

https://meraki.cisco.com/products/wireless/mr53e

[cammoody]

You're correct, thank you for pointing that out! I've forwarded a message to the team responsible for those pages.

[Darg]

Hi,

I just found another typo. On the MR74 datasheet:

Features section:

MR74 Typo

Regards!

[cammoody]

@Darg I sent that along to our datasheet team for an update, thanks for pointing that out!

[stevenwelsby]

A very minor typo I spotted is on the MX250 & MX450 product pages.

Under Highlights > Advanced security services it lists "Cisco Threat Grid1" - I think it should be a 2, not 1.

1 Requires Advanced Security License
2 Requires additional licensing for Threat Grid Cloud

All the other product pages have 2, with the exception of the MX400/600 which I believe do not support Threat Grid.

[cammoody]

Ah, yes you're correct. Thanks @stevenwelsby, I forwarded a request to fix that to our main site team.

[cammoody]

Also, for future corrections and issues, please feel free to message me directly.