Solved: Re: Visio Shapes

s4mmy · ‎08-21-2017

Can we please get some update visio shapes?

CarolineS-Meraki · ‎10-21-2019

-----

----

Hi ya'll -

We have an update related to Visio stencils! The most up-to-date ones live here: https://www.cisco.com/c/dam/assets/prod/visio/visio/security-cisco-meraki.zip

These will be updated over time as we add or change products. You can see the last-update-date here: https://www.cisco.com/c/en/us/products/visio-stencil-listing.html (under the "Security" section, look for "Security-Cisco Meraki")

Cheers!

- Caroline

P.S. Yes, this link shows up under the “Security” section of the Cisco Visio Stencil Listing - but it includes our full suite of products.

dayoder · ‎08-22-2017

Now that you mention it, they could benefit from an update.

Something a little more representative than diamond, square, rectangle, etc.

TonyC1 · ‎08-23-2017

Which products are you looking for s4mmy?

s4mmy · ‎08-23-2017

vMX100

MR74 (can use MR72)

MR30H

MR33

TonyC1 · ‎08-30-2017

OK I'll pass this along to our product team, thanks for the feedback!

MilesMeraki · ‎09-11-2017

+1 on Updates; Any timeline for these?

Eliot F | Simplifying IT with Cloud Solutions
Found this helpful? Give me some Kudos! (click on the little up-arrow below)

JHHyde · ‎09-13-2017

+1 here as well. About to do a large deployment and non-generics would be a big help.

Thanks

TonyC1 · ‎09-19-2017

Hi all,

We're working on this and hope to have an update for everyone soon. Thanks for your continued patience!

plefevre1 · ‎10-12-2017

Is the MX250 Stencil available??

Shanec1 · ‎10-17-2017

any updates on this?

GavinMcMenemy · ‎10-23-2017

I'd like to know too.

I'm specifically interested in the MS250, mr32 and mr18 ranges and it would be nice to have decent stencils.

According to Google they're supposed to be here but damned if I can find them: https://www.cisco.com/c/en/us/products/visio-stencil-listing.html

Mr_IT_Guy · ‎10-25-2017

Stencils included that have been requested are:

@s4mmy
- MR74 (Uses same stencil as MR72. You can see this when you hover over it)
- MR30H
- I do not see anything for a vMX. Since the vMX is currently the same as the MX100, wouldn't that stencil work in your drawing for the time being? For the MR33, I'm assuming you can just use the same stencil as the MR32, although it says its for the MR32,MR34, and MR42.
@GavinMcMenemy
- MR18
- MR32
- MS250 (Uses same stencil as MS320. You can see this when you hover over it)

This is an updated stencil pack from the last time I was on here as they do have stencils for the MS410 & MS425.

Hope this helps!!

Found this helpful? Give me some Kudos! (click on the little up-arrow below)

GavinMcMenemy · ‎10-25-2017

Thanks Mr IT guy!

MattinVegas · ‎08-24-2018

I see the question asked for the MX250 shape but I didn't see anyone answer. Is there one out there.

Mark Withers · ‎09-07-2018

Is there a timeline on getting the MX-250 shape?

Yes, I can use a "similar" device... but in that case why would I bother with a specific stencil?

I'd just use a generic Switch stencil and label it "MX-250."

After all...

MX-250 stencil