Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Running Migration Utility on my Migration ACS Server (not my production server) to migrate from ACS 4.2 to ACS 5.5, I get "FATAL - Fatal Error !! - cannot connect to ACS 4.x DB !!" Bug report for CSCtn17779 states to run migration machine on Windows ...
The "packet-tracer" command for ASA's is fantastically helpful, so I have to wonder:Is there a version of the packet-tracer command for IOS? Some feature set or something?Thanks!
I've got a managed FlexConnect AIR-CAP1602I-A-K9 access point that was offline for a few hours.Checking "more event.log" I see it would fail from static IP to DHCP, then reboot. After each reboot I'd see this message several times per boot cycle:Mar ...
So I'm pushing out a config template to my APs via CPI1.3 (Configure, Lightweight AP Configuration Templates; select template; select my APs, Apply). I get a "Partial Success" to a few of my APs. When I hit "Details" for these partial successes I get...
Highly misleading reply. I know it's an old thread, but it's a high result on Google searches.
Melanie asked about 040-05F. Reply regarded the guard band between upstream and downstream, normally around 01E-02F (but in his DSLAM 01E-044). Of note, ...
For anyone still confused:
We're looking at two static routes:
ip route 0.0.0.0 0.0.0.0 172.10.10.10ip route 0.0.0.0 255.0.0.0 Null0
The first, "ip route 0.0.0.0 0.0.0.0 172.10.10.10" says "anything that matches 0.0.0.0 with a mask of 0.0.0.0--that m...
Massively so, even several years and versions later.
"Pre-deployment"? Really, Cisco? Really? That makes it sound like some prerequisite that needs to be put on every machine BEFORE I install the real thing. I know, I know, RTFM, would love to find ...
Try running these 2 commands in the CLI on primary and standby:
show conn count
show xlate count
If you have numbers here approaching 64,000, then you have an indicator of NAT/PAT exhaustion. In my experience numbers past about 44k caused issues (...
We spent years on this with TAC engineers.
The best solution we got to was having WCS or Prime (which took over for WCS) push out a template every morning with the VLAN mapping. Some people have reported only needing it weekly, others needing it hou...
