11-15-2013 02:22 AM - edited 03-08-2019 05:35 PM
Hello,
I fail to see how to tell the ISR to reroute traffic to the Towers when using a non std port in URL like
or
https://srv.example.com:45681/ .
Is there any map I could tweak to get this to work ?
Thanks !
Solved! Go to Solution.
12-04-2013 06:04 AM
Not the expert on ISR G2 but have you considered Port to Application Mapping (PAM)?
Something like
ip port-map https port tcp 45681
where 45681 is an additional port to consider for HTTPS.
source - http://tinyurl.com/75jyb
12-04-2013 06:12 AM
Hello,
Sorry for not having updated this thread before.
You are absolutely right, the IOS Scansafe connector uses PAM.
Thanks
12-04-2013 06:04 AM
Not the expert on ISR G2 but have you considered Port to Application Mapping (PAM)?
Something like
ip port-map https port tcp 45681
where 45681 is an additional port to consider for HTTPS.
source - http://tinyurl.com/75jyb
12-04-2013 06:12 AM
Hello,
Sorry for not having updated this thread before.
You are absolutely right, the IOS Scansafe connector uses PAM.
Thanks
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide